🧰 Tools

All tools needed are usually found in makerspaces.

Tool	Image	Purpose	URL
Bench		Should have plenty of flat space to accommodate several parts at the same time.	link
Soldering Station		Needs controllable temperature and small tip (enough to fit a M2 hole). Will be used to heat brass inserts and place them into 3d printed parts by carefully melting the plastic. No wire soldering will be needed.	link
Hex/Allen Screwdriver Set		For fastening M2, M2.5 and M3 screws.	link
Small Pliers Set		Might be used to remove 3d printed supports and aid in placing connectors.	link
Retractable Knife (optional)		Might be used to remove any unwanted excess material from supports.	link
ESD Tweezer Set (optional)		Helps to pick and position small parts during assembly.	link
Label Maker (optional)		For labelling, in case more than one device is being made.	link