Skip to main content

📦 Bill Of Materials

Parts

info

The list below refers to a single device.

Identifier standard (ID)​

All materials follow the same pattern:

    X Y _ NN _ ( Z / NNN )
  • X → Electronics, Mechanics, Consumables or Accessories
  • Y → Type
  • N → Crescent number
  • Z → Different alternatives (A, B, C, ...) or N → Crescent sub-number

⚡ Electronics​

warning

Depending on where the device will be deployed a different type of Particle MCU will be needed.

Make sure you order the correct option, being EL_01_A for North America or EL_01_B for Europe.

General Parts​

IDTypeSubtypeSpecificationURLQty
EB_01BoardMainCustomcustom1
EB_02BoardSensingCustomcustom1
EL_01_ALogicMCUParticle B-SoM LTE-M B404X (for North America)link(1)
EL-01_BLogicMCUParticle B-SoM LTE B524 (for Europe)link(1)
EP_01PowerBatteryCustom⚠️1
EP_02PowerSolar PanelVoltaic Systems P105 - 5.5W 6V Solar Panellink1
ES_01SensorGasAlphasense A4x2 (CO+NO2) + AFE board⚠️1
ES_02SensorParticulateSensirion SPS30link1
ES_03SensorThermalAdafruit MLX90640 110º FoV shieldlink1
EH_01HarnessCableU.FL to U.FL – CINCH 415-0086-050link1
EH_02HarnessCableCustom – From Sensor Board to Main Boardcustom1
EH_03HarnessCableCustom – From Particulate Sensor to Sensor Boardcustom1
EH_04HarnessCableCustom – From Thermal Sensor to Sensor Boardcustom1
EH_05HarnessCableAreMe – 90 Degree USB-C male to femalelink1
EH_06HarnessCableQianrenon – 90º Waterproof USB-C "pass through" 30cmlink1
EV_01VaultStorage Card32GB MicroSDlink1

Custom Parts​

Boards​

Due to the quantity of items, these lists are available in a dedicated spreadsheet:

Harnesses​

IDTypeSubtypeFromToSpecificationURLQty
EH_02_02HarnessCrimped WireEB_02EB_01Molex 0503948051-06-B6-Dlink20
EH_02_03HarnessHousingEB_02EB_01Molex 0511102052link2
EH_03_01HarnessWireES_02EB_020.08 mm2 (AWG 28) x 300 mmlink5
EH_03_02HarnessSocketES_02EB_02JST SZH-002T-P0.5link2
EH_03_03HarnessHousingES_02EB_02JST ZHR-5link2
EH_04_01HarnessWireES_03EB_020.08 mm2 (AWG 28) x 150 mmlink4
EH_04_02HarnessSocketES_03EB_02JST SSHL-002T-P0.2link1
EH_04_03HarnessSocketES_03EB_02JST SSH-003T-P0.2-Hlink1
EH_04_04HarnessHousingES_03EB_02JST GHR-06V-Slink1
EH_04_05HarnessHousingES_03EB_02JST SHR-04V-S-Blink1
tip

💡 You can buy these boards fully assembled together with harnesses here.

⚙️ Mechanics​

General Parts​

IDTypeSubtypeSpecificationURLQty
MM_01MountingMagnetRigMount Magnetic 1/4" Mount – Longlink2
MF_01FixationBrass Insert1/4" – for Plasticlink2
MF_02FixationBrass InsertM2 – flanged, for Plasticlink13
MF_03FixationBrass InsertM3 - tapered, for Plasticlink14
MF_04FixationStainless ScrewM2X6 – socket head hexlink13
MF_05FixationStainless ScrewM2.5X4 – socket head hexlink1
MF_06FixationStainless ScrewM3X16 – socket head hexlink14
MF_07FixationWasherM2 washer – stainlesslink5
MF_08FixationWasherM3 washer – stainlesslink7
MF_09FixationSpacerM3 6mm spacer – ABSlink6
MO_01OpticsLensGermanium, Flat, Polished – ø 25.4mm x 2mmlink1
MS_01SealingO-RingOil-Resistant Buna-N – 3/32 Fractional Width, Dash 116link2
MS_02SealingO-Ring CordOil-Resistant Soft Buna-N – 3/32 Fractional Widthlink2 ft
MI_01IDLabelPlastic Thermal Label (optional)link2

3D Printed Parts​

IDTypeSubtypeSpecificationQty
MP_01Print3DTop1
MP_02Print3DMiddle1
MP_03Print3DBottom1
MP_04Print3DBattery Cover1
MP_05_01Print3DSwitch (top)1
MP_05_02Print3DSwitch (bottom)1
MP_06Print3DCamera Mount(1)

🧵 Consumables​

IDTypeSubtypeSpecificationURLQty
CP_01PrintFilamentPLA Whitelink0.7 kg
CS_01SealingLubrificationRubber Greaselink5 g

🔌 Accessories​

info

The device uses USB-C for charging, flashing firmware and transfering data.

Please, choose among the cable options below according to your needs (A or B).

General​

IDTypeSubtypeSpecificationURLQty
AL_01_ALogicData + power cableUSB-C → USB-Clink1
AL_01_BLogicData + power cableUSB-C → USB-Alink1
AP_01_APowerOutlet ChargerUSB-C, ?? Watts, Bivoltlink1
AP_01_BPowerOutlet ChargerUSB-A, ?? Watts, Bivoltlink1
AV_01_AVaultMicroSD Card ReaderUSB-Clink1
AV_01_BVaultMicroSD Card ReaderUSB-Alink1
AO_01OpticsCleaning ClothMicrofiberlink1