📦 Bill Of Materials
info
The list below refers to a single device.
Identifier standard (ID)
All names follow the same pattern:
X Y _ NN _ ( Z / NNN )
- X → Electronics, Mechanics, Consumables or Accessories
- Y → Type
- N → Crescent number
- Z → Different alternatives (A, B, C, ...) or N → Crescent sub-number
⚡ Electronics
warning
Depending on where the device will be deployed a different type of Particle MCU will be needed.
Make sure you order the correct option, being EL_01_A for North America or EL_01_B for Europe.
General Parts
| ID | Type | Subtype | Specification | URL | Qty |
|---|---|---|---|---|---|
| EB_01 | Board | Main | Custom | custom | 1 |
| EL_01_A | Logic | MCU | Particle B-SoM LTE-M B404X (for North America) | link | (1) |
| EL-01_B | Logic | MCU | Particle B-SoM LTE B524 (for Europe) | link | (1) |
| EP_01 | Power | Battery | Lithium Ion Battery - 3.7V 10050mAh (10 Ah) | link | 1 |
| EP_02 | Power | Solar Panel | Voltaic Systems P105 - 5.5W 6V Solar Panel | link | 1 |
| ES_01 | Sensor | Gas | Alphasense A4x2 (CO+NO2) + AFE board | link | 1 |
| ES_02 | Sensor | Particulate | Sensirion SPS30 | link | 1 |
| EH_01 | Harness | Cable | U.FL to U.FL – CINCH 415-0086-050 | link | 1 |
| EH_02 | Harness | Cable | Custom – From Particulate Sensor to Sensor Board | custom | 1 |
| EH_03 | Harness | Cable | AreMe – 90 Degree USB-C male to female | link | 1 |
| EH_04 | Harness | Cable | Qianrenon – 90º Waterproof USB-C "pass through" 30cm | link | 1 |
| EV_01 | Vault | Storage Card | 32GB MicroSD | link | 1 |
Custom Parts
Boards
Due to the quantity of items, these lists are available in a dedicated spreadsheet:
- 📝 Main Board (2025-XX-XX)
Cables
| ID | Type | Subtype | From | To | Specification | URL | Qty |
|---|---|---|---|---|---|---|---|
| EH_01_01 | Harness | Wire | EB_01 | ES_01 | TBD | TBD | 1 |
| EH_01_02 | Harness | Connector | EB_01 | ES_01 | TBD | TBD | 2 |
| EH_02_01 | Harness | Wire | EB_01 | ES_02 | 0.08 mm2 (AWG 28) x 300 mm | link | 5 |
| EH_02_02 | Harness | Socket | EB_01 | ES_02 | JST SZH-002T-P0.5 | link | 10 |
| EH_02_03 | Harness | Housing | EB_01 | ES_02 | JST ZHR-5 | link | 2 |
tip
💡 You can buy these boards fully assembled together with cables by contacting My Fast PCBA from FAE Technology S.p.a..
⚙️ Mechanics
General Parts
| ID | Type | Subtype | Specification | URL | Qty |
|---|---|---|---|---|---|
| MM_01 | Mounting | Magnet | RigMount Magnetic 1/4" Mount – Long | link | 2 |
| MF_01 | Fixation | Brass Insert | 1/4" – for Plastic | link | 2 |
| MF_02 | Fixation | Brass Insert | M2 – flanged, for Plastic | link | 7 |
| MF_03 | Fixation | Brass Insert | M3 - tapered, for Plastic | link | 13 |
| MF_04 | Fixation | Stainless Screw | M2X6 – socket head hex | link | 7 |
| MF_05 | Fixation | Stainless Screw | M2.5X4 – socket head hex | link | 1 |
| MF_06 | Fixation | Stainless Screw | M3X16 – socket head hex | link | 13 |
| MF_07 | Fixation | Spacer | M3 6mm spacer – ABS | link | 6 |
| MS_01 | Sealing | O-Ring | Oil-Resistant Buna-N – 3/32 Fractional Width, Dash 116 | link | 2 |
| MS_02 | Sealing | O-Ring Cord | Oil-Resistant Soft Buna-N – 3/32 Fractional Width | link | 2 ft |
| MI_01 | ID | Label | Plastic Thermal Label (optional) | link | 2 |
3D Printed Parts
More info in the mechanics section.
| ID | Type | Subtype | Specification | Qty |
|---|---|---|---|---|
| MP_01 | 3D | Top | 1 | |
| MP_02 | 3D | Middle | 1 | |
| MP_03 | 3D | Bottom | 1 | |
| MP_04 | 3D | Switch (top piece) | 1 | |
| MP_05 | 3D | Switch (bottom piece) | 1 | |
| MP_06 | 3D | Battery Cover | 1 |
🧵 Consumables
| ID | Type | Subtype | Specification | URL | Qty |
|---|---|---|---|---|---|
| CP_01 | Filament | PLA White | link | 0.7 kg |
🔌 Accessories
info
The device uses USB-C for charging, flashing firmware and transfering data.
Please, choose among the cable options below according to your needs (A or B).
General
| ID | Type | Subtype | Specification | URL | Qty |
|---|---|---|---|---|---|
| AL_01_A | Logic | Data + power cable | USB-C → USB-C | link | 1 |
| AL_01_B | Logic | Data + power cable | USB-C → USB-A | link | 1 |
| AP_01_A | Power | Outlet Charger | USB-C, 30 Watts, Bivolt | link | 1 |